Trailer Hitch Receiver Lock for 2" Trailer Hitches - Stainless Steel
(471 reviews)
Price: $31.58
In Stock
Trailer Hitch Receiver Lock for 2" Trailer Hitches - Stainless Steel
Item # 1480DAT
Our Price: $31.58
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (471)
- Q & A (0)
- Photos
Master Lock Trailer Hitch Lock - 1480DAT
- Fits 2 Inch Hitch
- Standard Pin Lock
- Keyed Unique
- Master Lock
- 2-3/4 Inch Span
- Stainless Steel
- Flush Pin
Innovative swivel head and solid stainless steel construction make this flush-design hitch lock a great choice for securing your ball mount, bike rack or cargo carrier to your 2" hitch receiver.
Features:
- Trailer hitch receiver lock is used in place of standard pin and clip to prevent theft of ball mount or accessories such as cargo carriers and bike racks
- Patented, stainless steel swivel head rotates 360 degrees for easy access
- Brass keyway with aluminum casing conveniently faces toward you, not off to the side
- Key-retaining design prevents "false locks" - key can't be removed unless lock is secure
- Push-to-lock mechanism makes locking easy and foolproof
- Lock clicks into place - you can feel and hear that it is locked
- Corrosion-resistant stainless steel
- Weather-resistant, snap-on cover keeps dirt and moisture out of keyway
- 2 Keys included
- Rugged construction complies with ASTM testing standards for exposure to salt and UV rays
Specs:
- Application: 2" x 2" trailer hitch receivers
- Pin diameter: 5/8"
- Inside pin length (span): 2-3/4"
- Limited lifetime warranty
Note: This lock will not work with some factory 2" trailer hitches that have an outside width wider than 2-3/4". If a longer pin length is needed, see hitch lock 1469DAT.
1480KA Master Lock Trailer Hitch Receiver Lock
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
- Wrong item was ordered
- Did not arrive in time
- Arrived Damaged
Customer Reviews
Trailer Hitch Receiver Lock for 2" Trailer Hitches - Stainless Steel - 1480DAT
Average Customer Rating: 4.7 out of 5 stars (471 Customer Reviews)
Innovative swivel head and solid stainless steel construction make this flush-design hitch lock a great choice for securing your ball mount, bike rack or cargo carrier to your 2" hitch receiver.by: Chris03/19/2024
About 6 months after owning it, the lock is completely froze up. Can't cut the darn thing off without cutting my safety chain hook up off either
by: Sandy C01/20/2023
Would’ve been a great little lock had it actually fit in the housing. Too short for mine. Turns out my housing is 3”, not 2”. My bad. Paid $25 for it, etrailer wants $17 for return shipping fee? Pretty lame. So buyer beware, measure your housing first!
by: Kenneth 02/07/2024
Works as advertised. I have a Tesla Y and this is the only one that will fit it the small space provided.
by: Phillip 06/21/2023
I really like this receiver lock and have 3 of this model in total. The machined finish of the lock bar and the locking mechanism with dust cap are well made. The blue (and red on my other hitch lock) accent color is a nice touch.
by: Edgar02/14/2018
Really good and cool looking hitch lock, service from trailer is always excellent, have purchased several products for my vehicles there, always great quality and superb costumer service..
by: Joe 03/20/2024
This hitch is very well made and very heavy. very good product
by: William07/16/2020
Solid gear. Well constructed. Easy & convenient security for hitch cover / ball assembly. Look forward to many years of reliable use.
by: Lance 01/23/2024
Works flawlessly
by: DM05/08/2015
Exactly what I needed for my 2014 Jeep Wrangler! Fits perfectly and does not interfere with the light connector.
by: Tim 06/15/2023
Great service from e-trailer. These people are on top of things.
by: Philip01/16/2016
Great alternative for a trailer hitch lock for my 2016 Yukon because of GM's lack of spacing between receiver and seven pin plug to use my lock that had key entering from the horizontal direction.
Philip
3/12/2017
Worked fine. thx
by: Earnest05/24/2022
Durable locks that are easy lock and un lock.
Earnest
5/25/2023
Still performing as expected. Quality product.
by: Throckmort0n09/05/2022
In addition to the hitch and bike rack, a Kuat, I purchased this extremely sturdy lock. It’s thicker than the one which came with the rack, but still has no problem being threaded through the hitch and rack, and adds stability, besides security.
by: Chris E.09/10/2016
Love the product, the service and the very personal touch from etrailer.com! Great to deal with and an overall great experience so far! The lock was for my hitch extender which is also perfect?
Chris E.
9/10/2017
It continues to work very well
by: Elaine 10/30/2020
Easy to use, works as advertised. I use this to lock my bike rack onto my Subaru Crosstrek and its easy to lock and unlock.
Elaine
10/31/2021
Still clicking along after a year of use. No issues.
by: Cooper08/29/2022
Love the products, love the support, love the videos and resources for using these. Couldn't be happier with your company, except ONE THING: Shipping.
In ordering two hitches (got one for a friend) both came with the hitches bursting through the cardboard box.
While there was no damage to either (it's steel!) In the second shipment, the including lock pin set got so rattled the boxed set came apart, and the keys literally fell out of the MAIN box during shipping.
Looking at some other customer reviews, this is NOT uncommon.
I understand saving some money on shipping - but your shipping department needs to pack smaller items in a more secure manner within these huge boxes.
It also wouldn't hurt to use some styrofoam on the edges of the hitches that are prone to puncture the boxes, causing an egress point for the smaller insecure items in the box to be lost. Just MHO.
by: Eric 07/07/2022
It just plain works, however due to the right angle locking design it is a little awkward to get the lock head on while you are holding the key in the spinning lock head and at the same time holding the pin in with you other hand as you put pressure on the pin while you are pushing on the locking head AND turning the key while the lock hesd wants to spin...mine will not press on and lock without the key in and turned..3 handed monkey operation
by: Emir07/30/2020
Great product! Solid and sturdy construction, exactly as described. Also, fast processing and shipping! Great company with great products.
by: Olga K05/13/2019
Works great, no issues. This lock makes it easy to access the keyhole. Our previous straight lock took two people and some tricky hand positions to get the key inserted, because of the tight spacing around the hitch reciever and electrical trailer connector on the back of our Audi Q7. I'd recommend this to anyone with a cramped setup around their hitch.
by: Peter07/12/2018
I like the fact that I now only need to carry 1 key set to open two of these locks; but it's a little short to use on my 2014 Toyota Tacoma -- is just won't lock because the shank is about 2-3mm shorter than what I need. Now I have an extra 2" hitch lock that I can't use for what I purchased it for.
Heather A.
7/12/2018
This lock will not work with some factory 2 trailer hitches that have an outside width wider than 2-3/4. Toyota OEM trailer hitches have that extra piece on the outside of the hitch and they require a different, longer locking hitch pin such part #1469DAT.
Helpful Links
by: Steve P01/27/2017
Excellent hitch lock for a 2" receiver!!
Steve P.
1/27/2018
Still working great one year later!!
by: Robert10/24/2019
so far so good - nice fit no wiggle what so ever, great customer support, I told Angela what I was looking for and she lead me in the right direction.
by: Windy08/10/2016
Just got this and it fits and looks great! So far I'm very happy
by: David 08/02/2023
Fits great.
25
471
Show More Reviews
See what our Experts say about this Master Lock Trailer Hitch Lock
- Distance from Center of Hitch Pin Hole to Each Bike on the Reese 3-Bike Rack 63123The manufacturer does not provide these specs so I went out to our warehouse and measured the 3 Bike Hitch Mount Folding Rack w/ Rotating Shank part # 63123 for you. While using this bike rack with the 2" stinger, the distance from the center on the hitch pin hole to the center of the first cradle is 18-1/2", 24" for the middle cradle, and 29-1/2" for the last cradle (furthest away from the vehicle). While using the bike rack with the 1-1/4" stinger the above measurements will need to be...
view full answer...
- How to Determine the Hitch Size for Hitch locksTo determine the size of the receiver lock you will need you need to determine the size (see link below) of the receiver on your vehicle and you also need to measure the overall width of the outside of the receiver at the hitch pin hole. If you have a class I or class II receiver you will need a 1-1/4 inch receiver lock and if you have a class III receiver or larger you will need a 2 inch receiver, then you need to make sure the inside width of the receiver lock is at least as wide as the...
view full answer... - Will Master Lock Hitch Pin Work with B&W Tow & Stow Adjustable Ball MountBecause of the large span required to secure the ball mount of the B&W Tow and Stow 3-Ball Mount # BWTS10048B, the Master Lock Trailer Hitch Receiver Lock # 1480DAT will not work to secure the ball mount to the shank. The span of the # 1480DAT hitch pin lock is not long enough to secure the ball mount to the shank. The long pin in the Rapid Hitch Trailer Hitch Lock and Adjustment Pin Lock Set # AM3492 is the only pin we carry that is long enough to span the 4 inch wide ball mount of the...
view full answer...
- Will Aftermarket Hitch for 2020 Chevy Equinox Fit Behind rear Bumper CutoutAll of the aftermarket hitches that fit your 2022 Chevy Equinox Premier will sit below the rear bumper fascia and aren't designed to be hidden behind that rear panel - for that exact setup you'll need to have an OEM hitch installed. If the receiver being behind that panel isn't a deal breaker then I recommend going with the etrailer Trailer Hitch Receiver # e59ZR because it has a matte black finish that not only blends in better with your vehicle trim but it does a better job holding up...
view full answer... - Replacement Parts Needed For Blue Ox Sway Pro Weight Distribution Stolen Hitch HeadFirst you will need to determine if you have the Old Style Head # BXW4011, New Style Head # BLU54XR, Old Style Underslung # BXW4012 or New Style Underslung # BLU34XR for your Blue Ox SwayPro weight distribution. The difference is how the spring bars attach to the head. You will also need a Shank # BXW4000 to attach the shank to the head. For a hitch ball you will need either a 2" # A-90 or 2-5/16" # C40008 to match your trailer coupler. A 1-7/8" 12pt Thin Walled Socket # ALL643216 is needed...
view full answer... - Will Master Lock Hitch Lock # 1469DAT Fit Factory Trailer Hitch on 2008 Toyota SequoiaThe Master Lock locking hitch pin # 1469DAT is likely going to fit your 2008 Toyota Sequoia with factory installed trailer hitch. This lock is designed for 2-1/2 inch hitches so it is very long, the inside span that actually goes through the receiver is 3-1/4 inches long. Measure the width of your receiver on the outside (from pin to pin hole) and if less than 3-1/4 inches long it will fit. You likely have a 2 inch trailer hitch. If so then pin # 1480DAT would be a better fit. It has a...
view full answer... - 5/8 Hitch Pin With 4-1/2 SpanSince you have a 3/4-Ton truck I assume that you have a 2-1/2" square receiver using a 5/8" hitch pin. We don't have a stainless steel option, but you could use the etrailer # e65TR which has a 4-1/2" span and it has a durable black finish or the JR Products # 37201065 which has a 4-3/4" span and is chrome plated.
view full answer... - Trailer Hitch Lock to Secure Ball Mount to Trailer Hitch ReceiverFrom what I can tell it sounds like you are needing a hitch lock to secure your ball mount to your trailer hitch receiver to replace the pin. We do have that, with the right one just depending on the size of your trailer hitch: - 1-1/4" Hitch Receiver: Trailer Hitch Receiver Lock # e98879 - 2" Hitch Receiver: Trailer Hitch Receiver Lock # 1480DAT - 2-1/2" Hitch Receiver: Trailer Hitch Receiver Lock # 1469DAT - 3" Hitch Receiver: Trailer Hitch Receiver Lock # 34061074-D
view full answer... - Whats Included with the Florida Gators Trailer Hitch Receiver Cover Part CTH4SThe Florida Gators receiver cover # CTH4S won't include a hitch receiver lock or hitch pin and clip, but I certainly would recommend one such as the Master Lock # 1480DAT. The pin and clip is part number # PC3 and will fit 2 and 2-1/2 inch receiver hitches. For 1-1/4 inch receivers the hitch pin and clip # PC2 and hitch receiver lock # e98880 would work great. They both have a pin diameter of a 1/2 inch. I included a few video reviews for you too.
view full answer... - Equal-i-zer Weight Distribution System w/ 4-Point Sway Control for Ford F-150Yes, the Equal-i-zer weight distribution hitches do reduce tongue weight by using a spring bar to move some of the tongue weight to your trailer axles, and some to your front truck axle. Probably just what you need to stop your truck from squatting down in the back also. If your trailer dry weight is 8300 pounds then a tongue weight of 10 to 15% would be 830 to 1245 pounds. However nobody I have ever met actually tows a "dry" trailer. You should consider the weight of your trailer when...
view full answer... - Parts Needed To Tow Small Pace American 4 x 6 Enclosed Trailer With 2020 Jeep CherokeeTo tow the small Pace American 4 x 6 enclosed cargo trailer with the 2020 Jeep Cherokee you will need a hitch (you already have), 4-way wiring, a ball mount, lock and hitch ball. I recommend Curt Vehicle Wiring Harness with 4-Pole Connector part # C56406 which is known to last a bit longer compared to the other wiring options available. You also need Curt Ball Mount part # C45070 which will give you the rise that you need. If your coupler is the standard height of 17" from the bottom...
view full answer...
- Will this fit a Honda Ridgeline 2017As long as your Honda Ridgeline has the factory 2 inch trailer hitch receiver installed, the Carr Hitch Mounted Step # CARR183252 referenced in your question will work great. This will slide right into the hitch receiver to provide a sturdy step for gaining quick and easy access to the Ridgeline's roof or cargo area. The step platform measures 5 inches long and 2-1/2 inches wide. You will just need to add a standard pin and clip like # PC3 or a locking pin like # 1480DAT to secure the...
view full answer... - Hitch Step That Does Not Extend Out For 2 Inch Hitch There is one option for a hitch step for your 2 inch hitch that won't extend out much past the bumper, and that's with a hitch step that flips up (and down), from Carr: - Carr Hitch Mounted Step for 2" Trailer Hitches - Black # CARR183252 or Reflective Finish # CARR183012 All of the other steps are going to protrude out a good distance from your 2 inch hitch, but since the step on this flips up and down, it won't stick way out will be the closest to the rear of your Tucson. You'll also...
view full answer... - How to Determine if the Master Lock Hitch Lock part # 1480DAT will fit a Hitch or NotSome vehicles (usually Toyota), have hitch tubes that are wider than most standard hitches. In those cases the part # 1480DAT would not be long enough to fit. What you will need to do is measure the outside width of your hitch to find out if this will fit. If the width of your hitch ends up less than 2-3/4 inches this will fit and work well. If you need a wider hitch the Tow Ready part # TR63253 has a usable span of 3-1/2 inches.
view full answer... - Lock Recommendations for B and W Tow and Stow Ball MountThe B&W Tow & Stow 3-Ball Mount do not come with a keyed locking pin to secure the shank to the receiver. For that I recommend the Master Lock Trailer Hitch Receiver Lock for 2" Trailer Hitches # 1480DAT. If you want a locking pin for the ball mount, you would need the longer of the two pins that comes with the Rapid Hitch Trailer Hitch Lock and Adjustment Pin Lock Set # AM3492. I have added links to video reviews of each product for you.
view full answer...
- Trailer Hitch Receiver Lock Recommendations For a 2007 Ford F-250 With Weight Distribution SystemThe Master Lock Trailer Lock, # 1480DAT, and our etrailer.com Hitch Receiver Lock, # e98882, are similar locks in the sense that they have the same fit applications (2 inch hitch receivers) and build material (stainless steel). Both locks are highly rated by our customers. The main difference between these two locks are the swivel head of the Master Lock and the side facing head of the DeadBolt lock. The swivel head feature from Master Lock allows for easier access when you need to remove...
view full answer... - Looking Hitch Pin Recommendation for a 2012 Ford F-150 with 2-1/2 Inch Trailer Hitch Receiver SpanIt will be a snug fit so if the outside of the receiver on your truck is 2-1/2 inches locking pin # BD580402 should fit. On each end of the pin, on the insides that face the inner span, it is tapered so there will be just enough wiggle room. It might be safer to go with span that is just a little wider like # e98880 that has a 2-5/8 inch span. Then there is an extra long span on # e98881 that measures 3-5/8 inches inside width. If 3-5/8 is too long and you do not want to chance a 2-5/8,...
view full answer... - Carr Hitch Mounted Step For 2" Receiver With United States Marine Corps EmblemWe do have the Carr Hitch Mounted Step for 2" Trailer Hitches # CARR183142 with your USMC logo on the bottom of the step. A Trailer Hitch Receiver Lock # 1480DAT will secure the step to your receiver. And as it has a stainless steel construction you will be able to remove it after years of corrosion.
view full answer... - Can Locking Pins Be Used With B&W Tow & Stow 3-Ball MountI spoke with my contact at B&W about locking pins for the Tow & Stow 3-Ball Mount # BWTS10048B. He confirmed that pins can be used in the ball mount, but they need to be able to span the hitch, have a diameter of 5/8 inches, and be rated for 10,000 pounds. I found the longer of the 2 pins in the Rapid Hitch Trailer Hitch Lock and Adjustment Pin Lock Set # AM3492 to span the width of the Tow & Stow # BWTS10048B. I have attached some photos I took showing the adjustment pin lock in the Tow...
view full answer...
- What Hitch Locks Are Good For Resisting Rust And CorrosionYes, you are correct the best hitch lock to prevent rust and corrosion is the stainless steel lock. The stainless steel locks will not corrode. The Trailer Hitch Receiver Lock - Stainless Steel Flush Design, # e98882, is one of our top sellers. The price difference is only a few dollars from the chrome to the stainless steel so it is definitely the better buy. The other choice for a stainless steel lock is the Master Lock Trailer Hitch Receiver Lock, # 1480DAT, it is also stainless steel...
view full answer... - Will a Hitch Lock for 2-1/2 Inch Trailer Hitches Fit a 2 Inch Trailer HitchThe Master Lock hitch lock # 1469DAT is designed with a longer pin that what is typically needed for a Class III, 2 inch trailer hitch since it was designed for wider 2-1/2 inch hitches. However, both 2 inch and 2-1/2 inch hitches have a 5/8 inch pin hole diameter so the lock will fit. The inside span is 3-1/4 inches and may appear very long in a 2 inch hitch. For the same lock designed for 2 inch trailer hitches use # 1480DAT. Its inside span is 2-3/4 inches. I have included links to...
view full answer... - How to Correct Key That Will Not Turn in Master Lock 1480DAT Hitch LockWhen a key will not turn in a lock with an item like Master Lock # 1480DAT sometimes a very gentle tap with a small hammer will help to fully seat the key in the tumbler. You can also try a light sanding of the key's teeth with fine grit sandpaper (500-grit wet type is what I recommend) to remove any tiny spurs that could be the cause for the problem. Another effort you might try is with the key out of the lock, position the lock with the opening facing down, and while in this position...
view full answer... - Will Trailer Hitch Lock # 1480DAT Fit Roadmaster Base Plate Kit #1424-1 on 2003 Jeep WranglerThe pins used in the Roadmaster base plate kit # 1424-1 are 5/8 inch diameter pins. The Trailer Hitch Receiver Lock, # 1480DAT, is also a 5/8 inch diameter pin. So it will fit the same holes as the regular pins. The inside pin length on the lock is 2-3/4 inches. The widest part of the end of the pin, the blue part, is 1.22 inches in diameter so a little less than 1-1/4 inches. That means that the blue part will stick up closer to that bolt by 0.59 inches. I then measure how far the black...
view full answer...
Do you have a question about this Trailer Hitch Lock?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Robert G
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Video Edited:
Joshua S
Video by:
Dustin K
Installed by:
Cole B
Installed by:
David F
Updated by:
Wilson B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Katrina D.
3/22/2024
That is not good to hear at all! I have a couple of tips and tricks you can try. WD-40, a de-icer, or Graphite Spray are lubricants that keep water out of locks to prevent freezing. You could also smear some petroleum jelly on the lock, it works the same as WD-40 or the graphite spray. Since the lock is already frozen, you could dip your key into some hand sanitizer. The alcohol from the hand sanitizer should melt the ice after you wiggle it around a bit. Try some of these out and let me know how it works for you and we can go from there.